• STEP 1: Power up the machine using the adapter or the batteries (battery compartment located below the machine) then set up the bobbin and thread the machine.
  • STEP 2: To position the thread correctly, you should locate the thread holder on the side. After pulling off the bobbin holder and spring underneath it, slide on the bobbin.
  • STEP 3: The thread goes from the bobbin through the first thread guide on the needle arm, through the two plates in the tension control and through the second thread guide at the end of the needle arm.
  • STEP 4: The machine sews from left to right. Hold the fabric with the left hand, giving it some gentle tension and turn the machine on using the power switch on the top. The fabric feeds by itself into the machine.